This week we look at a track-mounted drill rig from Caterpillar and a rough terrain crane from Link-Belt. Click to begin the slide show.
Product Snapshot: Track-Mounted Drill Rig and Rough-Terrain Crane
ASTM Ecoflex is a pre-insulated pipe designed for direct-burial applications. The pipe can be used to transfer heated water from renewable-energy sources to commercial structures. It consists of hePEX pipe with barrier tubing surrounded by closed-cell, PEX-foam insulation and covered by a waterproof, corrugated HDPE jacket. The pipe is available in 1-in., 11/4-in. and 11/2-in. ASTM sizes. Ecoflex comes in single- and twin-pipe models and is available in continuous lengths of up to 600 ft. Uponor, Inc.; 800-321-4739; www.uponor-usa.com
Unknown
Powerblanket Extra-Hot Heating Blankets are able to thaw frozen ground up to 24 in. deep for concrete preparation, footings and excavations. Run on standard 120-volt power, the blankets are available in 2x2 ft, 6x12 ft and 3x25 ft sizes. Standard blankets are rated to -10�F; tougher models are rated to -40�F. The lightweight blankets are water-resistant. Powerblanket; 877-398-7407; www.powerblanket.com
Unknown
The Link-Belt RTC-8080 is an 80-ton rough-terrain crane that sports a 41-ft to 127-ft-long, four-section factory-formed boom. Able to operate under full power, the telescopic boom slides on Teflon wear pucks that require no greasing. The crane is available with three onboard lattice-fly jibs, with up to 64 ft of additional reach. Some of the jibs allow for multipart reeving. Maximum tip height is 199 ft. A 6.7-liter, 270-hp Cummins diesel compliant with Tier 4 Interim emissions provides power, while a standard multi-link suspension keeps the ride smooth. Link-Belt Construction Equipment Co.; 859-264-6246; www.linkbelt.com
Unknown
Able to drill holes up to six inches, the CAT MD5150 Track Drill features a carousel rod changer that can hold six rods and accommodate multiple lengths and diameters of drill steel. An automated lube system eliminates the need to stop the machine for manual greasing every two hours. It is powered by a CAT C11 engine rated at 385 hp at 1,800 rpm, which meets Tier 3 emissions regulations. The drill has multiple shutdown methods, accessible from the cab or at ground level for additional safety. Caterpillar Inc.; 309-675-8995; www.cat.com
Unknown
Post a comment to this article
Report Abusive Comment