subscribe to ENR magazine subscribe
contact us
advertise
careers industry jobs
events events
FAQ
Mcgraw Hill Construction
ENR Logo
SUBSCRIBE TODAY
& receive immediate web access
Products   11/17/2010
Tunnel-Digging Rig: Direct-Control System The Boomer XL3 D is a tunnel-digging rig that features direct control by the operator. Intended for large tunnels in civil projects, it can be fitted with a wide range of powerful rock drills for different rock conditions. The rig features a Tier 3 engine and a redesigned operator cabin that blocks lower overall noise levels. Atlas Copco; 413-746-0020; www.atlascopco.com
Drill Driver: Subcompact Size The M12 Hammer Drill Driver is 75/8 in. long, weighs only 2.8 lb and is able to deliver 22.9-ft-lb of torque. The tool is powered by a 12V lithium-ion battery and has a metal gear housing. It is compatible with Milwaukee’s line of 12V lithium-ion tools. Milwaukee Electric Tool Corp.; 800-329-3878; www.milwaukeetool.com
Diamond Chop Saw: Longer Blade Life The DW8500 Diamond-Edge Chop Saw Blade is able to cut metal with an abrasive wheel’s efficiency. The blade’s brazing allows it to be used with a conventional chop-saw to cut pipe, steel studs, angle iron, rebar and threaded rod. The diamond grit significantly extends the life of the blade. DeWALT; 800-433-9258; www.dewalt.com
Conduit Inlet: Pass Through Cast-in-Place Concrete The CSD embedded conduit inlet system allows for gas and water pipe passes through cast-in-place concrete. The inlets fit SLIPSIL plugs and have a collar that acts as both a water barrier and a fixed point within the concrete. The inlets are vibration-resistant. Beele Engineering; www.beele.com
----- Advertising -----
  Blogs: ENR Staff   Blogs: Other Voices  
Critical Path: ENR's editors and bloggers deliver their insights, opinions, cool-headed analysis and hot-headed rantings
Project Leads/Pulse

Gives readers a glimpse of who is planning and constructing some of the largest projects throughout the U.S. Much information for pulse is derived from McGraw-Hill Construction Dodge.

For more information on a project in Pulse that has a DR#, or for general information on Dodge products and services, please visit our Website at www.dodge.construction.com.

Information is provided on construction projects in following stages in each issue of ENR: Planning, Contracts/Bids/Proposals and Bid/Proposal Dates.

View all Project Leads/Pulse »

 Reader Comments:

Sign in to Comment

To write a comment about this story, please sign in. If this is your first time commenting on this site, you will be required to fill out a brief registration form. Your public username will be the beginning of the email address that you enter into the form (everything before the @ symbol). Other than that, none of the information that you enter will be publically displayed.

We welcome comments from all points of view. Off-topic or abusive comments, however, will be removed at the editors’ discretion.