subscribe to ENR magazine subscribe
contact us
careers industry jobs
events events
Dodge Data & Analytics
ENR Logo
Web access will be provided
as part of your subscription.

Massive Kroll Tower Crane Supports Seattle Tunnel Job

Text size: A A
[ Page 1 of 2 ]
Photo courtesy of Terry McGettigan/Tower Crane Support
Crane's load rating is 1,800 tonne-meters. The Krll can cover up to 250 ft in any direction.
----- Advertising -----

Krøll is known for making the heftiest tower cranes in the world, but its rigs are rarely seen in the wild. A contractor is using one to help build out a tunnel that will house new light-rail lines in downtown Seattle.

As a portion of a larger $1.8-billion U-Link project that adds 3.15 miles of light-rail track in twin-bored tunnels from downtown Seattle north to the University of Washington, JCM—a joint venture of Jay Dee, Frank Coluccio and Michels Pipeline—had to stage its tunneling work on the same site as the program's Capitol Hill Station project. That job takes up about a third of the site and creates a gulf between the east and west areas, says Michael DiPonio, JCM project manager.

Instead of bringing in two or more crawler cranes to get hoisting capability throughout the area, JCM opted for a Krøll 1800, which reaches about 80% of the entire site with one machine.

Krøll distributor Terry McGettigan, Tower Crane Support, San Diego, helped JCM find a crane large enough to handle the job. Due to the limited availability of large cranes for sale in North America, JCM opted to buy new from Krøll.

JCM bought the model K1800, manufactured in Denmark, for $2.2 million, spent another $280,000 on shipping and erection—it arrived this past January and should work on the job for nearly three years—and $250,000 on the crane's foundation. Under Washington code, the foundation required costly design reviews even though it takes up just 13 sq ft.

Also known as a horizontal-jib crane, the hammerhead is a monster. It is rigged with 250 ft of jib and has a hook height of 112 ft. The beast is fitted with 176,000 lb of counterweight and has a maximum capacity of 132,000 lb out to 80 ft. At its farthest radius, it can lift 33,000 lb at its jib tip of 246 ft—a working diameter of nearly 500 ft. The hoist reeving can be changed in minutes from a two-part line, which has a capacity of up to 44,000 lb, to a six-part line, which has a capacity of up to 132,000 lb.

“It would take the equivalent of a 700-ton mobile crane with over 300 feet of boom to match that of the K1800's maximum load radius,” says McGettigan.


[ Page 1 of 2 ]
----- Advertising -----
  Blogs: ENR Staff   Blogs: Other Voices  
Critical Path: ENR's editors and bloggers deliver their insights, opinions, cool-headed analysis and hot-headed rantings
Project Leads/Pulse

Gives readers a glimpse of who is planning and constructing some of the largest projects throughout the U.S. Much information for pulse is derived from McGraw-Hill Construction Dodge.

For more information on a project in Pulse that has a DR#, or for general information on Dodge products and services, please visit our Website at

Information is provided on construction projects in following stages in each issue of ENR: Planning, Contracts/Bids/Proposals and Bid/Proposal Dates.

View all Project Leads/Pulse »

 Reader Comments:

Sign in to Comment

To write a comment about this story, please sign in. If this is your first time commenting on this site, you will be required to fill out a brief registration form. Your public username will be the beginning of the email address that you enter into the form (everything before the @ symbol). Other than that, none of the information that you enter will be publically displayed.

We welcome comments from all points of view. Off-topic or abusive comments, however, will be removed at the editors’ discretion.