subscribe to ENR magazine subscribe
contact us
careers industry jobs
events events
Mcgraw Hill Construction
ENR Logo
& receive immediate web access

Renovation/Restoration: Award of Merit

Text size: A A
Photo courtesy of Architect of the Capitol
U.S. Capitol Dome Skirt Restoration
----- Advertising -----

The $15.8-million skirt restoration of the U.S. Capitol dome, which is composed of nearly 4,500 tons of iron, resolved deterioration and life-safety concerns involving cast-iron decorative and structural elements located at the dome's exterior. Work included interior and exterior lead-paint abatement and repainting of all cast-iron plates and trusses; repair of severely deteriorated cast iron; repair and cleaning of sandstone and historic brickwork; the application of protective epoxy coatings; and drainage redesign and improvements.

Paint removal revealed numerous unforeseen challenges. After the removal of lead paint from the original sandstone, lead was still detectable three to four inches into the stone. Full remediation was not an option. Instead of using Dutchman repairs, the project team chose to repair the cracked units to limit the lead-abatement procedures required for stone removal.

After removal of the paint on the cast iron, numerous cracks and other unforeseen repair items were found. Many of these repairs required a new design solution. This new work resulted in a 43% increase in repairs.

Despite the added issues, the project team was able to complete its work two weeks ahead of schedule—in time for the 2013 presidential inauguration—and more than $1.3 million under budget.


U.S. Capitol Dome Skirt Restoration, Washington, D.C.

Key Players

Owner Architect of the Capitol

Design Firm Hoffmann Architects

General Contractor Gilbane-Christman Joint Venture

Construction Manager Jacobs Project Management

Structural Engineer Thornton Tomasetti

MEP Engineer Summer Consultants

Environmental Consultant Aerosol Monitoring & Analysis


----- Advertising -----
  Blogs: ENR Staff   Blogs: Other Voices  
Critical Path: ENR's editors and bloggers deliver their insights, opinions, cool-headed analysis and hot-headed rantings
Project Leads/Pulse

Gives readers a glimpse of who is planning and constructing some of the largest projects throughout the U.S. Much information for pulse is derived from McGraw-Hill Construction Dodge.

For more information on a project in Pulse that has a DR#, or for general information on Dodge products and services, please visit our Website at

Information is provided on construction projects in following stages in each issue of ENR: Planning, Contracts/Bids/Proposals and Bid/Proposal Dates.

View all Project Leads/Pulse »

 Reader Comments:

Sign in to Comment

To write a comment about this story, please sign in. If this is your first time commenting on this site, you will be required to fill out a brief registration form. Your public username will be the beginning of the email address that you enter into the form (everything before the @ symbol). Other than that, none of the information that you enter will be publically displayed.

We welcome comments from all points of view. Off-topic or abusive comments, however, will be removed at the editors’ discretion.